Jack up the car, whether you want to change a flat tire due to or want to see a part under the condition, not an easy job. Vehicle owners can be made hassle if misplaced it. Another consequence, automobile components can be damaged.
Here are tips on the appropriate placement of the jack. "In fact, in every car manual there are instructions already laying the jack is good and right. Fact, some simple procedures to change a tire in accordance with the character and the type of car,".
If the guide books have gone (missing), the following information may be helpful, especially for models jack (standard) shaped diamond shaped.
sedan
Position the jack has been provided in the section below under the front door (for front tires) and rear. There are available a sort of steel plates that appeared to put the top of the jack hole.
Do not jack up under the arm because these components. Because, besides the material is not strong, the tires are not raised only sokbreker are under pressure.
MPV and SUV
MPV type chassis that uses the framework can be used to boost the fulcrum. Same position as in the sedan, to the front wheels under the under the front door and the rear wheels under the bottom of the back door. If bersasis monocoque MPV, position the jack the same as in the sedan.
In addition to these positions, for MPV and SUV, front arm on the inside of the chassis can be used as a stick to the right place. In addition to stronger also can lift with good tires.
Do not forget, before the boost make sure the parking brake is activated or able to block the tires with a stone or beam on tires that are not inflated. If you do it on the side of the road safety triangle pairs are also a few meters away from the car as a marker of other road users.
