7/28/12

Be careful! Don't underestimate the brake

If the motor speed 50-70, 70 percent of the composition of the front brake and rear brake 30 percent. The use of front brakes are commonly used in circuits that require high speed.

"Hatch the correct segment is press brake - off the press - off, press again - off again and so on until the motor stops. Do not let the press brakes continue because it will make the brakes locked up,".

Car or motor vehicle suddenly stopped in front of us, is a common sight on public roads and around Jakarta. If you do not master the technique is good and right brakes, no doubt you can hit.

"Most people underestimate the 'brake' for speeding, even though the most difficult is the 'brake'" .

The motorcycle can not be stopped immediately and we have to predict the point of stopping the motor at a rate of road. Correct braking system is based on the distance of the speed of the motorcycle.

 if the motorcycle is at a speed of 30 KM, then the rider must use the rear brake instead of the front brake. "In a slow speed, the rear brakes will lock the wheels to the maximum rate, the rear brakes can have more control," he said.

Conversely, if the motor speed is high or above 40 KM to the above, then the rider must combine the front and rear brakes with larger front brake composition. If the speed of 40-50 KM, then the ratio 60: 40, 60 percent of the front brake and rear brake 40 percent.