California , - The car without driver can move to be similar to ordinary car and we call this Google Otonomos.
After passing through various development otonomos technology , the Internet search engine company , Google , is preparing to launch a prototype that is capable of driving a car without a driver . The process of introducing a car without a steering wheel and gas and brake pedals is also done through the release of photos .
In a press conference held in Rancho Palos Verdes , California , on Tuesday ( 27/05/2014 ) , Co - founder of Google , Sergey Brin , say , 100 units of the power will be used to introduce the technology to get closer to the community .
New York Times , Tuesday ( 27/05/2014 ) night , informing , the cars made by the manufacturer of Detroit , but they did not identify the company's original . Google explains a few things , the trial will begin in the summer ( April to October ) , the initial version still has the manual controls for the passenger , and the car will be tested by a company driver .
ambition
By producing a prototype , Google entered a new phase of their ambition results in creating otonomos vehicle . If the production version of this car could appear more quickly , meaning they can outperform automotive manufacturers such as Volvo Car Corp. and Nissan Motor Corp. , which says it is ready to market products otonomos , as early as 2020 .
Google research has been conducted since 2009 . Initially , they only use vehicles equipped with sensors , lasers , radar , smart computers that can make mapping , and software to drive that can be used to control the functions of the car automatically. Google claims that the unit has been running so far more than 1.1 million miles .
compact cars
From the photos can be seen , similar to Google otonomos car Smart ForTwo that has two doors and two seats . However , there is no steering wheel or gas pedal and brake in it . " This car does not need it . Software and sensors that perform all these tasks , "wrote Chris Urmson , director of Google 's self - driving car project , in a company blog .
" We have worked with partners from Detroit , Germany , and California . This prototype can accept the given address passenger , then drove him there safely , " she added .
2025
Menurutanalisis that unfolded IHS Automotive , more than two decades now , otonomos vehicles will dominate the market as the number of new units in 2035 to reach 11.8 million units . Then , in 2050 , all vehicles have been applying otonomos .
Estimated market price per unit was " only " Rp 81 million to Rp 116 million in 2025 . Inexpensive Why ? At that time , the technology is no longer a privilege that was rewarded with a high official price .
Get the latest auto and car reviews, articles and stories from automotive experts related topics in addition to the latest auto industry related news articles and automotive know how articles
6/11/14
6/10/14
Mercy AMG High Performance Powertrains come to mass production
Stuttgart , - Mercy AMG High Performance Powertrains come to mass production. This engine is admitted and relied on formula 1 by Mercedes Benz F1 racing devision.
Mercedes - Benz F1 Racing Division relied on to provide better input for the development of mass-production car . If implemented , the future , new machines , especially for fast performance cars , AMG , will have a " breather " technology derived from Formula 1 racing cars .
Success generates hybrid 1.600cc engine , V6 , which is currently unmatched in the F1 racing season 2014, the high-performance engine development facility ( Mercedes AMG High Performance Powertrains ) , in Brixworth , UK , now more relaxed .
So do not waste too much time , the German manufacturer will assign the people at the facility to develop a new generation of fast cars AMG , the time course of experience successfully spawned F1 hybrid engine .
"It is a decision , especially collaboration with AMG that might be new ideas emerge from the joint sitting , " said Thomas Weber , Head of Mercedes - Benz Development , told Autocar , ( 28/05/2014 ) .
He added that a team of engineers in Brixworth quality can not be doubted . Excavation could shed new ideas for building a new generation of machines for producing high-end next generation .
Facility at Brixworth already been contributed in the development of the car , such as providing input to the engine in the SLS AMG Electric Drive .
With the experience better and produce environmentally friendly engines other but toned , cars, Mercedes - Benz could be labeled AMG emblem will be given an additional " hybrid " , soon .
Mercedes - Benz F1 Racing Division relied on to provide better input for the development of mass-production car . If implemented , the future , new machines , especially for fast performance cars , AMG , will have a " breather " technology derived from Formula 1 racing cars .
Success generates hybrid 1.600cc engine , V6 , which is currently unmatched in the F1 racing season 2014, the high-performance engine development facility ( Mercedes AMG High Performance Powertrains ) , in Brixworth , UK , now more relaxed .
So do not waste too much time , the German manufacturer will assign the people at the facility to develop a new generation of fast cars AMG , the time course of experience successfully spawned F1 hybrid engine .
"It is a decision , especially collaboration with AMG that might be new ideas emerge from the joint sitting , " said Thomas Weber , Head of Mercedes - Benz Development , told Autocar , ( 28/05/2014 ) .
He added that a team of engineers in Brixworth quality can not be doubted . Excavation could shed new ideas for building a new generation of machines for producing high-end next generation .
Facility at Brixworth already been contributed in the development of the car , such as providing input to the engine in the SLS AMG Electric Drive .
With the experience better and produce environmentally friendly engines other but toned , cars, Mercedes - Benz could be labeled AMG emblem will be given an additional " hybrid " , soon .
6/9/14
Tracing one of the first classic Swedish sports car
Gothenburg , - Let's try to know the origin of racing car made by Volvo. Tracing one of the first classic Swedish sports car.
Long before Volvo is known as a brand with advanced security features , the Swedish manufacturer has sports car called the Volvo Sport . Launched on June 2, 1954 , 2 - passenger roadster is the company's first sports car .
Blaze of ideas Volvo founders , Assar Gabrielsson , when visiting the United States ( U.S. ) in the 1950s . The aim is to study the market before launching the product there . He studied , there is a strong interest in the U.S. with European sports car -sized compact . With this in mind , Volvo must have the goods.
Assisted by specialist companies fiberglass body from California , Glasspar , which makes the prototype version , the Volvo Sport project to start in 1954. Showing the short and stout body with a large grille . Wheelbase 2000 mm . Equipped with a 1.4-liter 70 PS engine with 2 carburetors . Top speed of 155 kph with a 3 - speed transmission system .
early retirement
At launch , Volvo says it will create 300 units , all for export . In 1956 , the first units delivered to customers in various countries , namely South Africa , Brazil , Morocco , and the United States . Volvo Sport also eventually be marketed in Sweden after reviewing the foreign policy of exclusive marketing .
In the early years of production , there are only 44 units . Then a year later 23 units out of the production line in 1957 . Career Volvo Sport finished in the year when the director of the new company , Gunnar Engellau , decided that the car should be " early retirement " because under standard and not making a profit . Up to now , there are 50 units that still exist .
But Volvo sports car does not end there . After discontinue , Volvo made the legend , P1800 sports car
Long before Volvo is known as a brand with advanced security features , the Swedish manufacturer has sports car called the Volvo Sport . Launched on June 2, 1954 , 2 - passenger roadster is the company's first sports car .
Blaze of ideas Volvo founders , Assar Gabrielsson , when visiting the United States ( U.S. ) in the 1950s . The aim is to study the market before launching the product there . He studied , there is a strong interest in the U.S. with European sports car -sized compact . With this in mind , Volvo must have the goods.
Assisted by specialist companies fiberglass body from California , Glasspar , which makes the prototype version , the Volvo Sport project to start in 1954. Showing the short and stout body with a large grille . Wheelbase 2000 mm . Equipped with a 1.4-liter 70 PS engine with 2 carburetors . Top speed of 155 kph with a 3 - speed transmission system .
early retirement
At launch , Volvo says it will create 300 units , all for export . In 1956 , the first units delivered to customers in various countries , namely South Africa , Brazil , Morocco , and the United States . Volvo Sport also eventually be marketed in Sweden after reviewing the foreign policy of exclusive marketing .
In the early years of production , there are only 44 units . Then a year later 23 units out of the production line in 1957 . Career Volvo Sport finished in the year when the director of the new company , Gunnar Engellau , decided that the car should be " early retirement " because under standard and not making a profit . Up to now , there are 50 units that still exist .
But Volvo sports car does not end there . After discontinue , Volvo made the legend , P1800 sports car
Which one can be included to good motorsport for Open Class of MotoGP?
Tokyo , - Which one can be included to good motorsport for Open Class of MotoGP? and probably, this Honda RCV 1000R can be recommended.
Finally , Honda will improve the performance catapult indication RCV1000R " production racer " that is currently used open class MotoGP team . However, according to a report GPOne.com , repairs for season 2015. Fastest 2016 season .
RCV1000R performance was disappointing teams and riders who use them . At a cost of 1 million euros ( USD 15.8 billion ) for use during the racing season , rather than chasing the podium , moving from the middle of the board alone is difficult .
In early development , Honda Racing Corporation claimed the difference was just 0.3 seconds compared to the engine manufacturer team , RCV213V . In fact , in five races this season already underway , the average RCV1000R best record with a time of 0.73 seconds adrift RC213V worst !
The biggest complaint is the lack of qualified personnel . When compared with a Yamaha engine in the open class that is currently used NGM Forward team , losing much performance . Problem is , Honda is up with Yamaha in the open class are already using machines M1 .
That's why HRC will develop the engine for the open class of RCV213V , complete with pneumatic valves , but without the seamless gearbox .
pneumatic valve
Although later RCV1000R will not get the seamless gearbox , pneumatic valves least will remove the weaknesses . All riders complained about the slow acceleration , far behind the RCV213V owned manufacturer and satellite teams .
The valve will be a promising profile as a more aggressive camshaft and valve openings better . It greatly helps to increase power and torque in the middle rounds . Valve also makes the machine can be lauched at higher rpm , the tip produces more power .
Perhaps , this plan will provide fresh air and an additional motivation for the riders who currently use RCV1000R , such as Nicky Hayden , Hiroshi Aoyama , Scott Redding , and Karel Abraham to wade through the rest of the 2014 season .
GPOne.com also reported, a new version of this engine will be tested RCV1000R end of this season , most likely from the series that takes place in Motegi , Japan . Motorcycle riders will be given to users RCV1000R with the acquisition of the highest points position . Input from Honda rider will help to develop again for season 2015.
Finally , Honda will improve the performance catapult indication RCV1000R " production racer " that is currently used open class MotoGP team . However, according to a report GPOne.com , repairs for season 2015. Fastest 2016 season .
RCV1000R performance was disappointing teams and riders who use them . At a cost of 1 million euros ( USD 15.8 billion ) for use during the racing season , rather than chasing the podium , moving from the middle of the board alone is difficult .
In early development , Honda Racing Corporation claimed the difference was just 0.3 seconds compared to the engine manufacturer team , RCV213V . In fact , in five races this season already underway , the average RCV1000R best record with a time of 0.73 seconds adrift RC213V worst !
The biggest complaint is the lack of qualified personnel . When compared with a Yamaha engine in the open class that is currently used NGM Forward team , losing much performance . Problem is , Honda is up with Yamaha in the open class are already using machines M1 .
That's why HRC will develop the engine for the open class of RCV213V , complete with pneumatic valves , but without the seamless gearbox .
pneumatic valve
Although later RCV1000R will not get the seamless gearbox , pneumatic valves least will remove the weaknesses . All riders complained about the slow acceleration , far behind the RCV213V owned manufacturer and satellite teams .
The valve will be a promising profile as a more aggressive camshaft and valve openings better . It greatly helps to increase power and torque in the middle rounds . Valve also makes the machine can be lauched at higher rpm , the tip produces more power .
Perhaps , this plan will provide fresh air and an additional motivation for the riders who currently use RCV1000R , such as Nicky Hayden , Hiroshi Aoyama , Scott Redding , and Karel Abraham to wade through the rest of the 2014 season .
GPOne.com also reported, a new version of this engine will be tested RCV1000R end of this season , most likely from the series that takes place in Motegi , Japan . Motorcycle riders will be given to users RCV1000R with the acquisition of the highest points position . Input from Honda rider will help to develop again for season 2015.
6/8/14
Luxurious accessories made by Mercy make it more classy
Bielsko - Bia ? A , - Luxurious accessories made by Mercy make it more classy and Carlex Design interior will realize that glamor.
luxury cabins Mercedes - Benz S - Class was not satisfactory creators Carlex Design interior of the car , in Poland . They offer interior concept of " super over " with a cast of 24 carat gold and alligator skin layer . It is still in the form of digital engineering , but it is possible they will make it if there is a message .
Absolute luxury thanks to the attachment of the precious metal was everywhere , from the outskirts of air holes , logo emblem on the dash , door speaker cover some , even for the various buttons in the cabin . No mention of the total weight of gold is used , but if properly implemented , is estimated to cost billions .
Not enough , all smelling skin faces made birthday . Carlex using a variety of materials with the skin color of the soil to make it look more elegant . Some of the items using the color beige , or brown and black alloys . As a sweetener , crocodile leather coat console , door trim , seat up .
Carlex also replaced the interior lights with bright white color . That is , when the evening came , the owner can still enjoy the sparkle of gold in the car . Consumers may also ask for other colors of light , such as a bit dim to reinforce the impression of cozy .
Because it is still a concept , does not mention the cost of making it a classy interior . Carlex open freedom to request additional material , including a small refrigerator adorn into an optional feature when buying the S - Class .
luxury cabins Mercedes - Benz S - Class was not satisfactory creators Carlex Design interior of the car , in Poland . They offer interior concept of " super over " with a cast of 24 carat gold and alligator skin layer . It is still in the form of digital engineering , but it is possible they will make it if there is a message .
Absolute luxury thanks to the attachment of the precious metal was everywhere , from the outskirts of air holes , logo emblem on the dash , door speaker cover some , even for the various buttons in the cabin . No mention of the total weight of gold is used , but if properly implemented , is estimated to cost billions .
Not enough , all smelling skin faces made birthday . Carlex using a variety of materials with the skin color of the soil to make it look more elegant . Some of the items using the color beige , or brown and black alloys . As a sweetener , crocodile leather coat console , door trim , seat up .
Carlex also replaced the interior lights with bright white color . That is , when the evening came , the owner can still enjoy the sparkle of gold in the car . Consumers may also ask for other colors of light , such as a bit dim to reinforce the impression of cozy .
Because it is still a concept , does not mention the cost of making it a classy interior . Carlex open freedom to request additional material , including a small refrigerator adorn into an optional feature when buying the S - Class .
developing durable battery for electric cars
Boulogne - Billancourt , - Renault-Nissan and LG are developing durable battery for electric cars and it need more cost to realize them.
Renault-Nissan Alliance has announced to invest 5 billion U.S. dollars , to develop an electric car . One important step was the announcement of the partnership between Renault with LG Chem to develop electric car batteries are more durable .
If the average electric car battery type lithium - ion battery last between 140-200 miles , targets to be achieved with this new battery reaches 290 km . This ambitious project will manifest electric car factory in France , with the approval of the French Alternative Energies and Atomic Energy Commission ( CEA ) , built from late 2015 to early 2017.
According to a report by Automotive News , ( 27/05/2014 ) , it will be directly proportional to the French government plans to raise incentives for electric and hybrid cars . Government incentives currently given in cash amounting to 5,000 euros ( USD 78 million ) , and will be increased to 7,000 euros per purchase of electric and hybrid cars for the sake of getting a fresh environment .
This durable battery project indicated will be applied to any of the models , namely the Renault Zoe . Hopefully, with a battery that last up to nearly 300 km in a single charge till full , will increase the number of buyers that the majority complaining about the mileage .
Renault-Nissan Alliance has announced to invest 5 billion U.S. dollars , to develop an electric car . One important step was the announcement of the partnership between Renault with LG Chem to develop electric car batteries are more durable .
If the average electric car battery type lithium - ion battery last between 140-200 miles , targets to be achieved with this new battery reaches 290 km . This ambitious project will manifest electric car factory in France , with the approval of the French Alternative Energies and Atomic Energy Commission ( CEA ) , built from late 2015 to early 2017.
According to a report by Automotive News , ( 27/05/2014 ) , it will be directly proportional to the French government plans to raise incentives for electric and hybrid cars . Government incentives currently given in cash amounting to 5,000 euros ( USD 78 million ) , and will be increased to 7,000 euros per purchase of electric and hybrid cars for the sake of getting a fresh environment .
This durable battery project indicated will be applied to any of the models , namely the Renault Zoe . Hopefully, with a battery that last up to nearly 300 km in a single charge till full , will increase the number of buyers that the majority complaining about the mileage .
6/7/14
How to control brake in safe and right ways?
This is good suggestion for you about How to control brake in safe and right ways. You should observe below tips more to make you safe on the road.
Not everyone is adept at controlling the motorcycle . But more important is actually not a matter of maneuver , but rather simple things like braking techniques . Many of the original brakes to reduce speed or stop , when to brake safely no theory .
the brakes are actually really effective is to use simultaneously between the front and rear brakes , instead of optimizing one .
" We're not talking percentages strength , for example front and rear brakes need a total amount of 100 percent . Because it is ambiguous . More effective way to stop or slow the rate is to use the front brake , ".
Here are the details for all the tips from Emerson biker in order to master the correct braking technique :
1 . Seen type motorcycle , according to Emerson's almost as if talking braking . Indeed , for a sport bike will be more complex , because after the brakes have to be coupled with a move to a lower gear ( engine braking ) if you want more effectively . It is also similar to motorcycle , but because the weight is not as heavy as the type cub sport , engine braking is done if urgent .
2 . Learning first ! When learning to ride a two-wheeled vehicles such as bicycles , has been imprinted in the mind in order to use the rear brake first . Well , for the motorcycle can not be fully applied . " Many assuming biker rear wheel brakes more effective , this thinking has to be changed , " said Emerson .
3 . Emphasis or force the brakes , which could determine the biker himself . It is seen from the speed and road conditions . For example, on a wet road , it would be nice if the brakes are not too pressed . That is why , if on wet or slippery roads , shall reduce the speed so if at any time it took the brakes , hard pressed not because the rate is too fast motorcycle .
The use of fingers to pull the brake lever to adjust the strength needed . For maximally braking , can use four fingers like squeezing motion . " Keep in mind , the brakes do not stand alone . Think safety when slippery roads with reduced speed . The use of front and rear brakes fixed , not one , " .
4 . Use of the rear brake alone is only recommended for certain conditions . For example, passing an instance with a low speed . Rear brake alone will make the motorcycle unstable .
5 . Cornering . In theory , only the brake is used to slow down before the corner entry speed . Once they entered the bend , it did accelerate in order to better grip the front wheels . Many are wrong , even when in a corner braking. Emerson is said to be very dangerous , especially in high speed .
6 . Generally need to practice using the brakes repan . It is necessary to anticipate when braking suddenly . Do not be afraid to use the front brake , if it's done correctly .
Not everyone is adept at controlling the motorcycle . But more important is actually not a matter of maneuver , but rather simple things like braking techniques . Many of the original brakes to reduce speed or stop , when to brake safely no theory .
the brakes are actually really effective is to use simultaneously between the front and rear brakes , instead of optimizing one .
" We're not talking percentages strength , for example front and rear brakes need a total amount of 100 percent . Because it is ambiguous . More effective way to stop or slow the rate is to use the front brake , ".
Here are the details for all the tips from Emerson biker in order to master the correct braking technique :
1 . Seen type motorcycle , according to Emerson's almost as if talking braking . Indeed , for a sport bike will be more complex , because after the brakes have to be coupled with a move to a lower gear ( engine braking ) if you want more effectively . It is also similar to motorcycle , but because the weight is not as heavy as the type cub sport , engine braking is done if urgent .
2 . Learning first ! When learning to ride a two-wheeled vehicles such as bicycles , has been imprinted in the mind in order to use the rear brake first . Well , for the motorcycle can not be fully applied . " Many assuming biker rear wheel brakes more effective , this thinking has to be changed , " said Emerson .
3 . Emphasis or force the brakes , which could determine the biker himself . It is seen from the speed and road conditions . For example, on a wet road , it would be nice if the brakes are not too pressed . That is why , if on wet or slippery roads , shall reduce the speed so if at any time it took the brakes , hard pressed not because the rate is too fast motorcycle .
The use of fingers to pull the brake lever to adjust the strength needed . For maximally braking , can use four fingers like squeezing motion . " Keep in mind , the brakes do not stand alone . Think safety when slippery roads with reduced speed . The use of front and rear brakes fixed , not one , " .
4 . Use of the rear brake alone is only recommended for certain conditions . For example, passing an instance with a low speed . Rear brake alone will make the motorcycle unstable .
5 . Cornering . In theory , only the brake is used to slow down before the corner entry speed . Once they entered the bend , it did accelerate in order to better grip the front wheels . Many are wrong , even when in a corner braking. Emerson is said to be very dangerous , especially in high speed .
6 . Generally need to practice using the brakes repan . It is necessary to anticipate when braking suddenly . Do not be afraid to use the front brake , if it's done correctly .
2,500 units of those sport crossovers get attention for the problems of braking system
Frankfurt ,- 2,500 units of those sport crossovers, released by Porsche, get attention for the problems of braking system.
Not long after it was launched last February , Porsche Tiger Direct is now getting a lot of attention . Reuters on Wednesday ( 28 / / 2014 ) , reported, Porsche is undergoing a process of examination of 2,500 units of the crossover , there was an error on suspicions related to the braking system .
Porsche explains , there are indications of faulty components during the production process . This represents , the German manufacturer is producing units rush in pursuit of sales targets under the command of Volkswagen AG . However, the vehicle remains problematic claimed standards .
In February, Porsche revealed his desire marketing reach 200,000 units in 2015 . Increase of achievements last year , 162,000 units . Cayanne and the Tigers are expected to be the backbone of global sales .
Last March , the Porsche 911 GT3 responsible for replacing engine production in 2014 after it was revealed potentially burning machine . A total of 785 units of the machine will be replaced with a new . Porsche urge consumers not to use it again before the sports car repaired .
Not long after it was launched last February , Porsche Tiger Direct is now getting a lot of attention . Reuters on Wednesday ( 28 / / 2014 ) , reported, Porsche is undergoing a process of examination of 2,500 units of the crossover , there was an error on suspicions related to the braking system .
Porsche explains , there are indications of faulty components during the production process . This represents , the German manufacturer is producing units rush in pursuit of sales targets under the command of Volkswagen AG . However, the vehicle remains problematic claimed standards .
In February, Porsche revealed his desire marketing reach 200,000 units in 2015 . Increase of achievements last year , 162,000 units . Cayanne and the Tigers are expected to be the backbone of global sales .
Last March , the Porsche 911 GT3 responsible for replacing engine production in 2014 after it was revealed potentially burning machine . A total of 785 units of the machine will be replaced with a new . Porsche urge consumers not to use it again before the sports car repaired .
The Cheap pessenger cars are sliding in New Delhi
Chennai - The Cheap pessenger car are sliding in New Delhi and those are made by Datsun, one of Japanese automotive car producers.
Cheap MPV Datsun Go + begin wandering the streets of India . Cars are built with the affordable scheme , terjepret camera is testing in Chennai region , near the factory Datsun -Nissan Renault already built at a cost of billions of dollars .
GO + golden color was identical to that marketed in Indonesia . The logo is covered for camouflage , but still, people easily recognize from the shape of the rear lights and body lines that have some sort of " hip " as a characteristic .
Indeed , Datsun India at the Auto Expo has announced some time ago that Go + will be marketed this year as well . The model will assist Go hatchback variant that became the first return of the Datsun in the world and has been marketed .
Actually not so large MPV market in India , however, saw the Datsun passenger cars 5 +2 configured it remains prospective as an option . Although a bit long , but the dimensions remain compact because it is built with the same platform as the hatchback Go .
Cheap MPV Datsun Go + begin wandering the streets of India . Cars are built with the affordable scheme , terjepret camera is testing in Chennai region , near the factory Datsun -Nissan Renault already built at a cost of billions of dollars .
GO + golden color was identical to that marketed in Indonesia . The logo is covered for camouflage , but still, people easily recognize from the shape of the rear lights and body lines that have some sort of " hip " as a characteristic .
Indeed , Datsun India at the Auto Expo has announced some time ago that Go + will be marketed this year as well . The model will assist Go hatchback variant that became the first return of the Datsun in the world and has been marketed .
Actually not so large MPV market in India , however, saw the Datsun passenger cars 5 +2 configured it remains prospective as an option . Although a bit long , but the dimensions remain compact because it is built with the same platform as the hatchback Go .
6/6/14
Spanish sport motorbikes, Bultaco is ready to compete
Barcelona ,- Spanish sport motorbikes, Bultaco is ready to compete to BMW and Ducati.
Spain also has a brand pride , Bultaco , which stood since 1958 , but closed in 1983 due to financial reasons . Francesc legendary family-owned brand ' Paco ' Bulto was declared the born again from 2014 , and spawned two new concepts that are ready to compete with the leaders of Italy and Germany .
The return Bultaco not rely on a regular combustion engine , but it is an electric motorcycle . Rapitan and Rapitan Sport claimed would have greater torque than the BMW S1000RR , but the maximum power is smaller when compared to the maxi scooter type motorcycle . Both 54 PS maximum power with 124 Nm of torque .
If the throttle is opened up stuck , reaching a maximum speed of 144 kph. Distance that can be reached with a single battery charge is 199 km in the city . To recharge the battery from empty to full , it took between 3.5-5 hours .
Both have the weight of 189 kg . Quite heavy considering they will carry a lithium- ion battery to replace the engine . Tank to store fuel usually replaced its function as a store of goods , including a helmet .
The plan , Bultaco will produce about 2,000 units for temporary distributed in five countries , Germany , France , the United States , Britain , and Spain itself . Yet to be revealed about the price , but the possibility of this prototype version will be produced next year .
Spain also has a brand pride , Bultaco , which stood since 1958 , but closed in 1983 due to financial reasons . Francesc legendary family-owned brand ' Paco ' Bulto was declared the born again from 2014 , and spawned two new concepts that are ready to compete with the leaders of Italy and Germany .
The return Bultaco not rely on a regular combustion engine , but it is an electric motorcycle . Rapitan and Rapitan Sport claimed would have greater torque than the BMW S1000RR , but the maximum power is smaller when compared to the maxi scooter type motorcycle . Both 54 PS maximum power with 124 Nm of torque .
If the throttle is opened up stuck , reaching a maximum speed of 144 kph. Distance that can be reached with a single battery charge is 199 km in the city . To recharge the battery from empty to full , it took between 3.5-5 hours .
Both have the weight of 189 kg . Quite heavy considering they will carry a lithium- ion battery to replace the engine . Tank to store fuel usually replaced its function as a store of goods , including a helmet .
The plan , Bultaco will produce about 2,000 units for temporary distributed in five countries , Germany , France , the United States , Britain , and Spain itself . Yet to be revealed about the price , but the possibility of this prototype version will be produced next year .
futuristic road markings, Glow in The Dark
Amsterdam , - This futuristic road markings, Glow in The Dark is different to be applied to common road markings.
The Netherlands became the first country to test the ability of road markings with lights in the dark ( glow in the dark ) . Basically , the idea of using this technology for driver safety while saving street lighting electricity use .
500m on one street in the southern suburbs of Amsterdam , curb line painted with a special ink that can store sunlight . Later in the evening , slowly emits green light . This light into a direction for all users of the road . Described , they emit last up to eight hours after dark .
When tested , the lines are lit path is working . In the video can be seen , when the car headlights turned off , the lines are lit streets can be used as a reference path . However there are still obstacles , inconsistent light in various conditions .
Of the various opinions driver through the streets , there are still some things that need to be considered . One of them disappeared when the big rain rays . All inputs will be studied to produce an even better way .
The Netherlands became the first country to test the ability of road markings with lights in the dark ( glow in the dark ) . Basically , the idea of using this technology for driver safety while saving street lighting electricity use .
500m on one street in the southern suburbs of Amsterdam , curb line painted with a special ink that can store sunlight . Later in the evening , slowly emits green light . This light into a direction for all users of the road . Described , they emit last up to eight hours after dark .
When tested , the lines are lit path is working . In the video can be seen , when the car headlights turned off , the lines are lit streets can be used as a reference path . However there are still obstacles , inconsistent light in various conditions .
Of the various opinions driver through the streets , there are still some things that need to be considered . One of them disappeared when the big rain rays . All inputs will be studied to produce an even better way .
6/5/14
enchanting facelift called by Chevrolet Aveo or Sonic looks like latest generation of Cruze
Shanghai, - enchanting facelift and sedan called by Chevrolet Aveo or Sonic will come in China and it looks like latest generation of Cruze. You can get the inexpensive or expensive version.
released a facelift version of Chevrolet Aveo, either a sedan or hatchback models. The new face first introduced in China. Furthermore, to Europe and the United States (known as Sonic), this year scheduled to get the update display.
The most obvious changes are located at the front face. It looks more like the latest generation of the Cruze, which was just introduced in China last month, as reported Worldcarfans, Monday (19/05/2014). As for the sedan variant, the small changes seen in the lights, rear bumper, and refreshment rim.
Specifications for China's manufactured by Shanghai General Motors, as a partner in the Bamboo Curtain country. Facelift version sold at the same price, which began 81 800 yuan for the cheapest variant. While the most expensive version, 114 800 Yuan. Aveo sedan go on sale in June, while the hatchback model followed one month later.
released a facelift version of Chevrolet Aveo, either a sedan or hatchback models. The new face first introduced in China. Furthermore, to Europe and the United States (known as Sonic), this year scheduled to get the update display.
The most obvious changes are located at the front face. It looks more like the latest generation of the Cruze, which was just introduced in China last month, as reported Worldcarfans, Monday (19/05/2014). As for the sedan variant, the small changes seen in the lights, rear bumper, and refreshment rim.
Specifications for China's manufactured by Shanghai General Motors, as a partner in the Bamboo Curtain country. Facelift version sold at the same price, which began 81 800 yuan for the cheapest variant. While the most expensive version, 114 800 Yuan. Aveo sedan go on sale in June, while the hatchback model followed one month later.
animated motorcycles to be realized into reality, Honda AVultus NM4
London , - This animated motorcycle is realized into reality, and that's Honda AVultus NM4 in elegant, powerful and futuristic design and look.
Vultus NM4 Honda will make its public debut in Europe . The most futuristic motorcycle design ever created and " counter " that will appear in the ComicCon , comics world exhibition held in London , 23-25 May 2014 .
Reason carpet debut at the non- automotive based , design -inspired NM4 Vultus animation ( anime ) and manga ( comic ) of Japanese , which is certainly in line with the comic exhibition .
" With NM4 Vultus , we offer a motorcycle with an identity and a unique driving experience . With a look that is inspired by the anime and manga , ComicCon is the natural habitat of these motorcycles on display to the public for the first time , "explained Dave Hancock , Head of Product Planning and Business Development of Honda Motor Europe .
The target market of motorcycles is quite extensive . Not only riders and motorcycle hobbyist , but also those who love cartoons , manga , and so on . NM4 Vultus also be referred to as a masterpiece of priceless art with sophistication and unusual features .
Interestingly , the ComicCon visitors who want to experience more of NM4 Vultus , can avail the facility of 3D movies . Visitors will serve as the surf rider " Neo - Tokyo " , the city of the future is full of challenges.
On another occasion , the author of this motorcycle will provide an explanation of the concept and what is actually to be achieved in the development of Vultus NM4 .
Vultus NM4 Honda will make its public debut in Europe . The most futuristic motorcycle design ever created and " counter " that will appear in the ComicCon , comics world exhibition held in London , 23-25 May 2014 .
Reason carpet debut at the non- automotive based , design -inspired NM4 Vultus animation ( anime ) and manga ( comic ) of Japanese , which is certainly in line with the comic exhibition .
" With NM4 Vultus , we offer a motorcycle with an identity and a unique driving experience . With a look that is inspired by the anime and manga , ComicCon is the natural habitat of these motorcycles on display to the public for the first time , "explained Dave Hancock , Head of Product Planning and Business Development of Honda Motor Europe .
The target market of motorcycles is quite extensive . Not only riders and motorcycle hobbyist , but also those who love cartoons , manga , and so on . NM4 Vultus also be referred to as a masterpiece of priceless art with sophistication and unusual features .
Interestingly , the ComicCon visitors who want to experience more of NM4 Vultus , can avail the facility of 3D movies . Visitors will serve as the surf rider " Neo - Tokyo " , the city of the future is full of challenges.
On another occasion , the author of this motorcycle will provide an explanation of the concept and what is actually to be achieved in the development of Vultus NM4 .
Subscribe to:
Posts (Atom)